Instructions

Individual letters can be lifted from the sheet using a small pair of tweezers or scalpel, You may find it easier to remove the centres of letters and numbers like P, R and O before lifting letter from the sheet as sometimes they fail to remain on backing sheet when letter is removed.

Before applying letters ensure that the surface is free from dust or dirt. Apply a scrap piece of vinyl to the surface to help you align characters more easily. If the surface is uneven a gentle heat from an Hair Dryer will help to mould the vinyl to the contour.

When happy with the position of characters apply a light pressure with the fingers. The vinyl is waterproof but can be coated with a sealer or varnish if required.

Lettering can be lifted from the backing sheet with a small pair of tweezers, ensure that you do not stretch the vinyl. you can also use a peice of sellotape with the tackiness taken off to apply to the lettering on the sheet then lifting off the complete word then apply to model and remove tape.

Before applying letters ensure that the surface is free from dust or dirt. It may be of help to use a scrap piece of vinyl to align letters easily. If the surface is uneven a gentle heat from an hair dryer will help to mould the vinyl to the contour.